What is the association between nursing staffing levels and adult Article

What is the association between nursing staffing levels and adult patient falls in hospitals - Article Example At hospital level, number of registered nurses should be increased to monitor patients in the wards and provide the required services. From records, increased number of nurses decreases falls among adult patients (Griffiths et al., 2014). The nursing staffs should be given education so as to understand their roles and associated problems. On the other hand, nurses’ needs should be well catered to motivate them and have enabling environment to offer their services. It can be achieved by considered them as financial assets that have a critical role in the hospital. However, in various unit-levels, experienced nurses should be retained at whichever cost. Evidence has shown that inexperience and lack of the necessary skill have contributed significantly to the falls among adult patients (Griffiths, et al., 2014). During hiring, nurse skill mix should be considered. It involves taking care of skill level and experience in order to improve services. From the records, it is not clear about the component of a nurse that contributes most to the reduction of fall. It is, therefore, crucial to establish this through research and make recommendations. The future studies should as well focus on evaluating the role of non-registered nurse staffs to the increased falls in the hospitals. Their relationship should be validated through replication of studies. Griffiths, P., Ball, J., Drennan, J., Liz, J. & Michael, S. (2014). The association between patient safety outcomes and nurse / healthcare assistant skill mix and staffing levels & factors that may influence staffing requirements: National Nursing Research Unit. New York, 1,

Breach of contract - contract law Essay Example for Free

Breach of contract contract law Essay Spanish Contract Law provides a broad notion of breach of contract for any behavior that departs from the specified behavior in the contract in any way (time, quality, substance, etc.) or is not specially justified on legal grounds (actions forbidden by the government are not breaches since they are justified on a legal ground). The general benchmark to determine breach is the contract agreed by the parties themselves, and not external notions. However, external notions are used in important situation such as the consumers market where the consumers expectations are the primary benchmarks to assess quality and performance since there is not an explicit contract. External notions are also important in other market, where a third party may have some duty or responsibility over the contract, and therefore, is responsible (at least in part) for any potential breach. The reason for breach does not exclude the breach. What matters is the breach. The analysis of breach takes place in objective terms. Subjective factors generally do not exclude breach, although they may affect remedies. In certain contractual areas, breach of duty and fault are generally required (professional contracts, management contracts: breach requires violation of a duty of care or a duty of loyalty). In professional contracts, the fault may be of a professional who was in contract with the firm, and in management contracts, it may be the fault of the manager. 2) Remedies: Spanish Contract Law provides a wide range of general remedies for breach of contract: †¢ Specific performance: the court forces the breacher to act as it was established in the contract. If for example, the contract stipulated that the promiser had to give the promisee a product of quality 2 and he delivers a good of quality 1, then as remedy the court force the promiser to deliver a good of quality 2. †¢ Damages: the court force the breacher to pay a certain amount of money  (damages) to the other party as compensation. It is a monetary remedy. The court calculate the amount to be paid. †¢ Liquidated damages: these are also monetary compensation, but with the difference that they are not calculated by the court, but they are instead specified in the contract itself. One example are the soccer players contracts, or sale contracts that specifies the amount to be paid for each day of delay. Other general remedies that we can find are: †¢ Termination: if a party suffers a breach, it can contract with another party and abandon its contractual obligation. If the breacher does not agree with this, court is necessary. †¢ Reduction of prices: in case of breach of a party, a general remedy is to reduce the price to equilibrate the contract. Generally, it is the aggrieved party who chooses the remedy to be imposed. 3) Specific performance: Specific performance is a remedy for breach characterized by the fact that a failed performance or departure from required action by the contract will be imposed upon breaching party. It is also characterized by several material variants of the remedy such as: forced delivery, forced action, injunction not to do, repair defective performance and replace non-conforming good. In the case of the injunction not to do, the court oblige the breacher not to do something, such as obliging a CEO to work for the competition if in the contract it was stipulated that he cannot. Specific performance conceptually includes repair and replacement of consumer goods. The main issue with specific performance, when it is feasible, is the issue of the balance of benefits and costs of the remedy. Specific performance implies that the breacher perform as the contract establishes. However, sometimes, the cost of this performance may be higher than the benefit in social welfare terms. Take the example of the mining firm, which has a contract with the owner of the land to mine for 10 years and then clean the land. When the 10 year pass, the firms breaches the contract and refuse to clean. The cost of cleaning the land is 20 millions, and the benefit for the  owner is 1 million. So if the court imposes a specific performance to firm, society will loose 19 millions. A good alternative would be to impose damages to the firm, which would be preferred by the owner, since an agreement between the firm and the owner will be reached that maximize the social welfare. In these cases, performance may be more costly than its value for promisee: performance may be ex post inefficient. There are both positive and negative features of specific performance as a remedy. As positive features, we can distinguish low informational requirements to apply remedy (avoids cost of error linked to estimating damages) and the party aggrieved by breach appears to be satisfied in its promissory expectation. As negative features, we find performance may be more costly than its value for promisee (performance may be ex post inefficient), requires a court order and takes time, for complex performances requires costly and difficult supervision by court and performance by a party forced to comply with contract may be perfunctory (lowest effort) at best. 4) Damages: Damages are understood as general remedies that can be applied to all types of contracts and breaches of contracts. It is a remedy defined in very broad terms: amount of money to compensate any harm suffered by the injured party as a consequence of any breach of contract. We can differentiate between two kinds of damages: expectation and reliance damages. This is why it is a remedy with a variable extension. Expectation damages: Expectation damages is the sum of money that will give the party damaged the same amount of welfare and utility than if the contract would not have been breached and the final result would have been attained. Therefore, the breach party would have to pay the aggrieved party an amount of money that would compensate for the harm caused and in addition an amount of money equal to the value of the performance for this party. There are however some problems with expectation damages since they are difficult to compute and some instances of moral hazard may appear. Those who seek for damages have to provide evidence of both the existence and amount of damages. This requirement has some exceptions in case of harm in re ipsa: illegitimate use of a productive good, deprivation of a productive good, and few other examples. Expectation damages is the general rule in Spanish Law for breach of contract. It is the damage measure that accompanies termination for breach and the replacement measure of specific performance. It is awarded when there is a breach of representations and warranties, advertising and promotional communications and in cases of pre-contractual fraud that are equivalent to breach of contracts. How can we compute expectation damages? When goods or services admit substitutes or cover transactions to avoid the negative consequences of the other party’s breach of contract, the price of these transactions is relevant. If the seller breaches the contract and the buyer has bought a good, generally fungible, then the expectation damages will be equal to the difference between the price of the substitute and the price established in the contract: Psub-Pc. If the buyer breaches the contract and the seller celebrates a cover sale the expectation damages would be equal to the difference between the price established in the contract and the price of the new sale: Pc-Psub. Other ways of computing expectation damages are the following: Market damages: (for fungible good with market price) buyer will receive expectation damages consisting of the difference between the market price when the breach of contract took place (Pm) and the contract price (Pc). Seller will receive the opposite difference. Expectation damages present some limitations that reduce it scope and amount. One of this limitations is the foreseeability rule. This rule state that the breacher should only be liable for the things that are foreseen or could have foreseen at the time of contracting and that are necessary  consequence of his failure to perform. For instance, if the foreseeable harm of a breach is 100 and the aggrieved party end up suffering a loss of 1000, the foreseeability rule states that damages will amount only to 100. The foreseeability rule gives incentives to give information in the time of contracting. Those who suffer from harm must declare the value of the performance. In tort law, there is no foreseeability rule, you pay the actual damage. Another limitation is the duty to mitigate damages: the aggrieved party is under the duty to mitigate damages that the other contracting party has caused with her / his breach of contract. Reliance damages: Reliance damages: sum of money that will give the party damaged the same amount of welfare and utility than if the contract would not have taken place (the initial situation). This is why reliance damages are generally lower than expectation damages. Reliance damages cover expenses for the injured party derived from concluding the contract, specific investments that the injured party has made in reliance of performance of the contract by the other party and opportunity costs. Limited assets: Damages do not always work well. Sometimes, individuals can bear the payment of these damages, and therefore, they will have incentives to reduce them. However, this is not always the case. When the breacher has not enough assets to pay damages up to the point of optimal care, damages do not work well, because people will not pay for the consequences of their acts, and therefore, their level of care will be the optimal according to what they can pay, and not what they should pay. This is known as judgement proof problem. Damages for pain and suffering: The traditional position of the Spanish Supreme Court and Spanish Courts is: †¢ To accept damages for pain and suffering for breach of contract †¢ To award damages for pain and suffering with a relative amplitude and generosity. †¢ To award damages for pain and suffering with several functions: †¢ To avoid the problems of calculating and justifying the amount of the damage award †¢ To compensate harm in personality rights (right to life, liberty, honor, etc.). †¢ To compensate non-patrimonial values joined to economic goods and rights (discomfort, inconvenience, disappointment, frustration) †¢ To punish intolerable or egregious behaviors of breach of contract. When an individual suffer harm, her utility decreases (she goes form point A to point B, but her utility function for money will not change). If this harm is economic, we can compensate this harm with money, which will leave her at point A again. However, the harm that an individual can suffer may be non-economic, and for the same amount of money her utility decreases (her utility function changes). Money cannot restore the initial utility (a huge amount would be needed). This is the case of pain and suffering (accident and death of a relative, discomfort, etc). This is why it is useless to take insurance for death, since it would not compensate the harm. The hairy hand example: What is the difference between expectation and reliance damage? Lets look at an example. An individual was injured in his hand and lost 50% of his use. He entered in a contract with a doctor who promised to reestablish the hand to a 100% of use in exchange for quantity of money. Before the contract was made, the individual was situated in an indifference curve that related all the  combination of hand use and money that let the individual indifferent. We assume that the individual is willing to give up hand use for money. After the contract and operation, the individual was worse off, with 25% of use. What should the doctor pay as damage? If expectation damages are used, the doctor should pay the individual a quantity of money that together with the 25% of hand use leave him with the same utiity as if the contract had succeded and he had 100% of use (situate him in a higher indifference curve). If reliance damages are imposed, the doctor should pay the individual a quantity of mon ey that, together with the 25% of hand use, leave him with the same utility as if the contract did not take place, with 50% of hand use (situate him in the initial indifference curve). 5) Liquidated damages: Liquidated damages are damages for breach that are not determined ex post breach by a Court or arbitration panel, but ex ante by the contract parties themselves into the contract. Such possibility of â€Å"privately stipulated† remedies for breach is acknowledged by most legal systems, typically in the form of payment of money, although other possibilities may exist. They typically replace Court damages and they can be agreed as added penalty for breach. The most important issue is whether Courts are forced to enforce liquidated damages, or they may disregard, or reduce, the amount of the liquidated damages award. The reasons why Courts allow liquidated damages are: †¢ Freedom of contract †¢ A large liquidated damages clause may be necessary to induce promisee to find promise credible and the contract sustainable. †¢ Parties are in a better position than Courts to assess benefits and costs of determining a given amount. †¢ Liquidated damages compensate systematic underestimation of damages by Courts. If liquidated damages are higher than the expectation damages, then the court will apply the second ones. There are however some economic arguments that may lead to reduce or at least control the level of liquidated damages clauses: †¢ â€Å"Excessive† damages clauses resulting from incorrect predictions or forecasts about future outcomes. †¢ External shocks unforeseen by parties that produce an unexpected increase in the damages payment. †¢ True â€Å"uncertainty† about future costs for one party. †¢ Behavioral biases that lead party to underestimate the true adverse impact of a damages clause (the â€Å"deferred cost problem†): †¢ Over-optimism concerning future performance and costs (the example of the gym) †¢ Hyperbolic discounting of future outcomes We can see the liquidated damages as barriers to entry. An excessive amount of LD is beneficial for the parties to the detriment of a third party who  may bid for the services of breaching party. Promisor agrees to pay an amount larger than ED, in exchange of higher price. Promisee uses high liquidated damages to extract larger payment from a third party interested in performance by promisor: larger payment from third party increases the surplus to the contract parties, that is shared between them. Also, excessive payment of third party are made possible by excessive damages clauses, which reduce efficient entry by third parties, and prevents them from successfully bidding for promisor’s performance. That is why the goal of reducing â€Å"excessive† liquidated damages is not to protect the breaching party, but third-parties. Sometimes, excessive LD for signaling are unwanted, since an unforeseeable contingency may appear that will cause a breach in the contract. A pooling equilibrium may be more desirable than a separating one when the distortion caused by the penalty on the â€Å"good type† is large enough. 6) Termination: Among the general remedies for breach, the last one is termination (or rescission, or cancellation, as it may also be called in Common Law jurisdictions). This remedy entitles the aggrieved party to cancel the contractual relationship with the breaching party, eliminating the obligations arising from the terminated contract. Once the contract is terminated the parties should give back what was received under the contract, unless the goods are now in lawful possession of a third party. In this case, the value of the goods would replace the goods themselves. The elimination of the effects of the contract is retroactive: it is considered that the contract did not exist. Spanish courts have established that termination does not require a lawsuit. However, if the other party disputes the termination or its conditions, restitution would require a lawsuit. Courts do not determine termination, but declare whether termination was or not properly effected by the party. The most contested issue about termination is when is termination available as a remedy. It is clear that not every breach or non-performance allows the  aggrieved party to terminate, but a qualified breach (material or fundamental breach) is required. We can define it as follow: †¢ Relevance: the breach must affect the central obligations or duties under the contract and not merely ancillary or incidental duties. †¢ Duration: the breach should not be merely sporadic or transitory, but likely to be repeated or continuing. †¢ Importance: the breach must substantially affect the interests of the non-defaulting party. Termination does not go alone, it does not exclude damages, and in fact it is naturally accompanied by damages payment.

Health Care Reform in the United States Essay example -- President Oba

Health Care Reform in the United States In the United States, more than forty million people are without health insurance. Of these people, many are employed by firms that do not offer coverage and many others fall just below the poverty line. Many are poor but still do not qualify for Medicaid. At least twelve million of those without health insurance are children. Reliable sources indicate that the number of uninsured people could rise as high as sixty million by the year 2010. There is also a dilemma that the insured United States citizens face, that their healthcare system is sick, and everyone is aware of its illness: profit. In 2008, Malike Hassan's, an HMO stockholdings CEO, salary was 166.4 million dollars. Most experts agree that the lack of plan participants' personal involvement in the healthcare system is largely responsible for inflation within the plans. However, as the debate rages on about how to best resolve the issues, it is certain that, as individuals become more involved in the healthcare process, they become an integral part of the solution. If people wish to change the system, they must change their role in healthcare reform from passive to active. In order to bring unification and unconstrained functionality to the U.S. healthcare system, people must first educate themselves on how their healthcare works, voice their opinions, and finally join together to bring reform. The first action people must take to insure their own well being and safety is to stay thoroughly informed on how their HMO plans run. Managed care is often criticized for encouraging the withholding of beneficial care from patients. People need to be aware that many HMOs contain Gag Rules. These rules, in contracts ... ...normous medical bills. Then there are citizens who are caught in the surreal world of Workers Comp, where money, if it ever shows up, is often too late. Healthcare is the one asset that affects every United States citizen. US citizens need to realize that the demand for healthcare services starts and ends with individuals. As personal involvement and education increase, people become empowered to make informed healthcare decisions, and that is good medicine for America as a whole. Bibliography: 1. Orient Jane M M.D. Your Doctor Is Not In Healthy Skepticism About National Healthcare Crown Publishing, Inc., Macon, GA, 2007. 2. National Organization of Physicians Who Care http://www.pwc.org/ 3. Daniels Norman. Benchmarks of Fairness for Health Care Reform Oxford Univ Press, London, UK, 2006. 4. Labor Party Online http:www.ipc.apc.org

Happiness: A Review and Critical Evaluation of Culture and Well-Being E

Ethnic Identity and Well-Being Summary. The purpose of this research is to attain a better understanding of the potentially protective effects of ethnic identity by observing the daily stressful demands of Chinese and Mexican adolescents through a daily diary study (Kiang, Yip, Gonzales-Backen, Witkow, &Fuligni, 2006). The researchers hypothesize that ethnic identity will protect against the negative effect of normative stressors (Kiang et al., 2006). Happiness was measured by factors that maximize quality of life and minimize anxiety through the analysis of ethnic regard, ethnic centrality and the interaction of the two and their affect on well-being (Kiang et al., 2006). The study focused on ethnic identity, self-esteem, stressful demands and daily well being using various scales and a daily diary checklist. The 2 week study consisted of 415 participants of Mexican and Chinese background in the 9th grade from the Los Angeles metropolitan area recruited from 3 high schools (Kiang et al., 2006). Ethnic iden tity was found to play a role in shaping who we are by increasing happiness and reducing anxiety in students with higher ethnic regard (Kiang et al., 2006). These results indicate a direct psychological benefit from holding positive perceptions of one’s ethnicity (Kiang et al., 2006). Evaluation. Consumption and Happiness Summary. The author proposes a theory based on previously tested research hypotheses on the relationship between consumption and selective well-being (SWB) on national and international levels (Ahuvia, 2002). Ahuvia (2002) proposes that SWB is increased by higher standards of living which create a cultural environment where people maximize their personal happiness by minimizing their social ob... ...adapt into men’s rolls, while men stay true to theirs. A study of such immense proportions and complexity has much room for error and thus room for improvement. The researchers should take into account various age groups and participants who are not on college campuses as they are not always a reflection of the society as a whole. Also, in addition to a questionnaire, a peer-review about the participant would be useful in order to more accurately obtain a holistic depiction the participant especially in cultures where pride is enhanced or suppressed. Future research in this area should be promising as women stepping out of homes and into the workforce is more common now than ever. The implications of these actions on the future of our society and its well-being could be better understood through study of the emotional affect of gender roles and culture.

Indigenous Knowledge Amd Essay

Pedagogy in First Nations Education A Literature Review with Recommendations. ’’ Marie Battiste, director of the Apamuwek Institute, in partnership with the Canadian Government has made a research conducting a literature review on indigenous knowledge. The author writes about the challenges that such a research implies. For example, the record of educational knowledge for indigenous people is not necessarily done through books as with the European knowledge system. Throughout the years, the rights of indigenous knowledge in the educational system under the constitutional Act of 1982 section 35 and 52 (p. 13) was not always respected. Her goal s to ensure that the right information about indigenous knowledge is integrated into classrooms. To achieve it, Battiste proposes three approaches. The first one would be to clarify insights into the tensions between Indigenous people and European ways of knowing. The second approach is on innovating program to help understand the challenges of Native People. The third part is based on the Author’s research and the Ministry recommendations in improving First Nations education. Marie Battiste suggests to focus on ‘’ Similarities between the two systems of knowledge ather than on their differences’’ as a start to introduce educational reform. (p. 11). Reference: Battiste. M. (2002) Indigenous Knowledge and Pedagogy in First Nations Education

To what extent did the Cold War play a role in the 1950s in catalyzing the Iranian revolution in 1979

To what extent did the Cold War play a role in the 1950s in catalyzing the Iranian revolution in 1979 Introduction The cold war is a historical event that took place between1945 to 1960. This is a period where there was an intense conflict between the nations in the Soviet Union (communist nations) and the democratic nations (for example, United States of America). The war is perceived to have started because the democratic nations and the communist’s nations had two different systems of government and neither of the two governments could compromise theirs to follow another (Gasiorowski 1998, 6).Advertising We will write a custom research paper sample on To what extent did the Cold War play a role in the 1950s in catalyzing the Iranian revolution in 1979? specifically for you for only $16.05 $11/page Learn More Other factors that contributed to the war include; economic indifference where U.S wanted the world to practice free trade while the Soviet union wanted nothing to do with international trade, the power rivalry where each of the nations wanted to dominate the other, another cause of the war was that the Russians, a member of the Soviet Union had extended Its influence to Europe which displeased many politicians in the united states advocating for the resistance against Russian expansion. It was then in 1947 when the United States secretary of state, George Marshall announced that the United States would aid in the regaining of a well economic trend in the world but laid conditions that implied the European countries that were to get their aid from U.S would have to disclose their economic records to the united states a move that the Soviet union regarded as intrusion of states affair. Together with many other factors the Soviet Union declined U.S offer but America, Britain and other nations got together to form the military alliances that resulted to the cold war. When it came to Middle East, the Americans and British had their own reason to not favor the influence of the Russian spreading across the region. Britain and t he United States had certain interests on the Iranian soil including the oilfields. To prevent Iran from falling into the hands of the USSR and to recover the oil company, the British and Americans responded by helping in the coup. The Iranian coup de tat of 1953 set the stage for this Islamic revolution that would come twenty six years later. When the weak Mosaddeq’s government nationalized a British oil company, Afterwards in 1979, the virulent anti American Islamic regime ousted the Shah, who was an American sympathizer. It is thus practical enough to hypothesize that the coup, brought about by the cold war (Amuzegar 1991, 28; Curtis 2007). Iranian revolution is also called the Islamic revolution. It can also be referred to as the 1979 revolution. 1979 is the year which the Iranian monarch was ended by the emergence of the Islamic Republic. This phenomenon was preceded by demonstration against the monarch in the year 1978 (Ruud 2008, 454).Advertising Looking for re search paper on asian? Let's see if we can help you! Get your first paper with 15% OFF Learn More The main difference with this revolution and other world revolutions was that this revolution was not caused by normal factors like the under privileged classes opposing oppression from the elite class of people nor was it because of issues of inequality, but it was seen different from other revolutions experienced there before in countries like France and the US. This revolution was supported by the whole society from the rich to the poor all these people revolted against their own state governance (Iran Chamber Society, 2010). Despite this lack of customary causes, the revolution resulted into rigorous changes within a short time. It was a massive and popular revolution that ended up toppling the system of monarch led by Shah Mohammad Reza Pahlavi. Thus, the revolution oversaw the replacement of the modernizing monarch by a theocracy. It is therefore believed that the cold war was a recipe for the Islamic revolution. Summary of the evidence This study tries to explain how the major superpowers who were once allies during the Second World War influenced the emergence of the Iranian revolution. As a matter of fact, the end of the Second World War was a precursor to the beginning of the cold war. As already stated, Cold War started as a result of hostile relationships between the United States of America and the former USSR. The conflict arose due to issues related to sharing the plunder of the Second World War. Since Iran was one of the victims of the plunder, the United States wanted to avoid the fall of Iran into Russia’s hands. The U.S. and Britain strengthened their interests in Iranian oil by overthrowing the democratically elected civil government and helping an American friendly government seize control of Iran. By doing this, Americans were trying to spread their influence into Iranian soil thereby blocking the USSR influence (Nayeri Nasab 2006, 7). However, more than two decades after, the Iranian government faced strong rebellion because of its monarch system and the anti-American movements, in 1979; the same government of the Shah was overthrown by the Iranian revolution that oversaw the reinstatement of a religious system of governance that persists up to date (Houghton 2001, 74). The Iranian coup de tat of 1953 The Americans and the British joined in the cold war in order to have control over the Iranians oil, because at the set time the Russians were gaining control over Iranian oil fields (Gottfried 2003, 18). Mosaddeq and his colleagues wanted to attain a complete oil independence to establish a lasting democratic government in Iran. This objective was obliterated by the 1953 coup de tat that was carried out by a combination of domestic and foreign forces. The 1953 coup marked the first important turning point in post war Iranian history (Gasiorowski Byrne 2004, 11).Advertising We will write a custom research paper sample on To what extent did the Cold War play a role in the 1950s in catalyzing the Iranian revolution in 1979? specifically for you for only $16.05 $11/page Learn More After Iranian Prime minister, Mohammad Mossadegh, was ousted from office, Shah Pahlavi assumed his position. Shah Pahlavi was actively involved in the coup of 1953. He was a pro-American figure who received a lot of support from the United States in return. After the Iranian coup, he began projects that aimed at westernizing Iran in all sectors including academic institutions. The shah wanted the universities to follow after the highly esteemed United States universities. The 1960’s saw the adoption import substitution industrialization approach to development. Enormous efforts were being made to industrialize Iran by building factories to ensure that goods no longer had to be imported to Iran. Thus, he wanted the goods to be produced within its borders (Wagner, H. 46) . As a result, there were several huge construction projects that were launched in Tehran. Roads, dams, railways, airports and hospitals were built because of this initiative. Oil output also increased, thereby guaranteeing greater revenue for Iran. To expound on the success of the Shah’s ambitious project, Iran was able to rise from the smallest oil producing and exporting country in 1960, during the formation of OPEC, to one of the largest in 1967. The shah saw Iran’s oil as a way for the country to change the global political dynamics (Hogan 1992, 153; Kinzer 2008, 59). His strength of leadership was obliterated after the Islamic revolution that oversaw his downfall. Evaluation of sources During the research of the study, a number of reference books were used including other reference material like the periodicals in the internet, and journals about Iranians Revolution among others. Specifically, from an online periodical titled â€Å"MacroHistory and world report: The Iranian revolution† the author has cited the precise happenings dates as to why and how the revolution took place in Iran. The article has elaborated profoundly the happenings before up to the time the revolution was said to have taken place at a point the author states, â€Å"After returning to power in 1954, the shah launched an effort to modernize Iran economically and socially. He was seeking to balance his increase in power with changes, which would be favored by the normal Iran people.† Another reference material used was the Encyclopedia of the Cold War, Volume 1 that clearly brings out the facts about Iranian revolution. The book is written in simple English that as a reader I was able to understand it very well. It defines the historic times events between 1945 and 1991 when the United States was in collusion with a group of nations that dominated world politics the USSR.Advertising Looking for research paper on asian? Let's see if we can help you! Get your first paper with 15% OFF Learn More From this reading, discussions of how states joined together to act against the other in way to show who was more superior are clearly brought out it also examines how nations continuous anxiety arose, widened and eventually calmed down. The author of the book is keen to note the time line of each occurring event: â€Å"The 1960s and 1970s saw significant rise in the observance of religion in part as a reaction to Shah’s reforms whish directly targeted the clergy and the core supporters† (Wagner 2010, 53). He also examines the military (CIA) efforts that contributed to the success of the coup that heard planned on including the diplomatic help from states that saw Iran not falling into Russians’ hands together with the evolution of the political arrears in Iran not forgetting its impact to the people of Iran. Using a geopolitical style of writing, the author is able to capture the readers attention to try and help the reader get to know the perspective of all th e nations that participated in the cold war. From the two sources it is clear that as a researcher, is well equipped to analyze whether the Cold War had any impact to the revolution of Iran. The accounts produced were meaning full to the coming up with the study above. Without the referencing over the accounts mentioned in the study, the events would be seen as unclear occurrences that leaves a reader having doubts as to whether the events that have been mentioned are true or just a story has been made up (Macrohistory and world report, 2011). Analysis When doing the research going through the historical context is quite important as the researcher gathers information and facts necessary to support the research question. When using a historical context, one needs to note the precise dates to establish the sequence of events instead of having vague dates. Knowing the historical background of an event from a historical context makes it easier to analyze the event thoroughly and more a ccurately. Hence, by considering historical context during a study it means there is essential balanced view to critically analyze the event or happening since there is enough evidence to prove it’s a true happening and the information present is usually needed for its restoration. The analysis of a historical context forms the base of the study conducted. Conclusion The cold war between Russia, the United States and Britain, and the Mosaddeq government played a major role in the onset of the 1953 Iranian coup that led to the subsequent downfall of the Shah Pahlavi’s government and the revolution of Iran came to birth. Pahlavi was a pro-American figure who had good diplomatic relationship with the United States. As a result the United States through the CIA helped the Shah oust Mosaddeq from the prime minister’s position through an organized institutional coup. The main reason for this action was because Mosaddeq’s government had nationalized British prop erty. Mosaddeq’s government was also weak and the U.S. and Britain feared that Iran would fall into Russia’s hands. Shah Pahlavi succeeded in the coup and engaged in major infrastructural and economic developments. However, not every Iranian citizen benefited from his projects. Consequently, students started demonstrating thereby paving way for stronger anti-Shah campaigns. The Americans overlooked the strength of these anti-Shah protests. Mainly who were the conservative Shiite Muslims who wanted their nation to be governed using Islamic Law. This led to the Islamic revolution that oversaw the ousting of the Shah in 1979. The revolution in 1979 had been supported for by practically every person in the Iranian society. Though during that time there were conflicts within some Muslims groups to mention: Islamic tendencies that included Islamists, Marxist-Islamic and democratic-Islamic and Marxist-Leninist tendencies that included fada’I, Tudeh, Maoist, and others this conflict was seen not to be major as compared to the Shahs rule that they wanted to over through. These groups did not let their conflicts deter them from overthrowing Shahs governance. Instead, they united together in efforts to bring down the Shahs governance and overthrowing the state. Although there were several Muslims who were of no particular tendencies, they were also said to participate in the overthrowing of Shahs governance in Iran. These people were regarded as the modern middleclass people who single solidly objected the removal of shah but were threatened to be accused of treason if they didn’t join the rest of their Muslim brothers in removing Shah from power. References Amuzegar, J., 1991. The Dynamics of the Iranian Revolution: The Pahlavis’ Triumph And Tragedy. New York: State University of New York Press. Curtis, M., 2007. The Coup in Iran, 1953. WordPress. Available through: http://markcurtis.wordpress.com/2007/02/12/the-coup-in-iran-1953/ . Ga siorowski, M. Byrne, M., 2004. Mohammad Mosaddeo and the 1953 Coup in Iran. Syracuse: Syracuse University Press. Gasiorowski, M., 1998. The 1953 coup de tat in Iran. Department of political sciences, Louisiana State University. Available through: http://iran.sa.utoronto.ca/coup/web_files/markcoup.html . Gottfried, T., 2003. The cold war: the rise and fall of the Soviet Union. Brookfield, Connecticut: Twenty first century books. Hogan, M., 1992. The End of the Cold War: Its Meaning and Implications. Cambridge: Cambridge University Press. Houghton, D., 2001. US Foreign Policy and the Iranian Hostage Crisis. Cambridge: Cambridge University Press. Iran Chamber Society, 2010. A Short Account of 1953 Coup. Iran Chamber Society. Available through iranchamber.com/history/coup53/coup53p3.php . Kinzer, S. 2008. All the Shah’s Men: an American Coup and the Roots of Middle East Terror. New Jersey: John Wiley Sons. Macrohistory and world report, 2011. The Iranian revolution. Macrohistor y and world report. Available through: fsmitha.com . Nayeri, K. Nasab, A., 2006. The Rise and fall of the 1979 Iranian Revolution: Its Lessons for Today. Google Documents. Available through: https://docs.google.com/viewer?a=vq=cache:nMpiJqS5On0J:bibliotecavirtual.clacso.org.ar/ar/libros/cuba/if/marx/documentos/22/The%2520rise%2520and%2520fall%2520of%2520the%25201979.pdf+Nayeri,+Kamran+%26+Nasab,+Alireza.+The+rise+and+fall+of+the+1979+Iranian+revolution:+its+lessons+for+today.+March+31,+2006hl=engl=kepid=blsrcid=ADGEESio-Q0ParYr79ilCh68C71tLmuyCSiDi8Vc3Ffyuze0ofy6zhyVU-kT42UDEdrUQXSa7q-n_TOehoQdoGXZ0d4NCeEvfTa6sUwYGQg6GDVg8tU3olW7y2KctzJQ6GKV6Z2vpvk3sig=AHIEtbTqSpYaZaCfMwkKbRtJNuWcM2dk6Q . Ruud van D., 2008. Encyclopedia of the Cold War, volume 1. Philadelphia, PA: Tailor Francis. Wagner, H., 2010. The Iranian Revolution. New York: Infobase Publishing.

buy custom Graff - Pinkert Case Study essay

buy custom Graff - Pinkert Case Study essay The 70 year old family owned Graff- Pinkert Company has since its establishment been dedicated to the turned parts industry. It is an international leader in automatic screw machines, rotary transfer machine and cnc/Swiss sales, service and parts. The company began during the Second World War. At the time, Aaron Pinkerts cousin Leonard Graff took helped him to run his screw machine shop. Leonards main responsibility was to locate machines US factories required for the war effort. Graff-Pinkert was housed in an area that was formerly a pickle factory. As a measure of growth, the company has sold over 5,000 automatic screw machines across the world since 1941. The company is now located in a modern 25,000 square foot facility in Oak Forest, Illinois as compared to the 5000 square foot where it first started (Graff-Pinkert sales, 2009). Strengths and Weaknesses of the Company The way Graff-Pinkert treats their customers is a huge strength on its own that contributes towards their reliability. Very few companies across the globe can accept returning of their products due to faults. This company embraces company satisfaction to a point that a customer can return the respective product for fixing. Another of the companys strength is its diverse nature; in such a way tha they deal with various areas of the industry. As much as they can produce new products, they can also rebuild and recondition machines. Another weakness is when it comes to buying a used machine and letting it to lie in the site. This means wastage of space and resources that could have been utilized elsewhere. This company deals with various aspects of machines. Research has however shown that specialization has been one of the most important trends used in the machinery business since 1940s. Those who have had a narrow focus on a particular type of equipment have really grown. Graff-Pinkert deals with so many areas of machinery making it to miss out on the advantage of specialization. Challenges The market of used machinery is not perfect owing to the fact that there a number of determining variables. The variables include condition, age, market timing, attachments, size, technological advancement, location and manufacturer. All these factors affect the quality or rather value of the particular machine in question. Competition from other companies is also another challenge that this company has faced. The nature of used machinery companies is such that there are a few mergers. This is so because the companies are rarely sold. In the event that tthe owner passes on, and there are no heirs to take it up, the inventory is liquidated and thus the business disappears. This situation hinders the advantage of mergers which helps to realize faster growth of companies. Other competitors in this industry include Adams Machinery, Lieberstein and Muslin and Angus (Graff, 2009). Recommendations Graff-Pinkert Company should continue working on customer satisfaction. It is only through customer satisfaction that a company can expand its market share and be able to move to another level in terms of sales. When customers are satisfied, the companys image as a whole is also boosted. The company should be careful when purchasing used machines to avoid cases of useless machinery lying in the site. Idle machinery that does not have any use wastes company funds. A lot of space for both storage and expansion is also wasted when a company has idle machinery. Conclusion Graff-Pinkert Company embraces full customer satisfaction. This is an ideal virtue which helps the company entirely on major decision making actions. Customer satisfaction cultivates trust and reliability of the customers. This eventually translates into increased volumes of sales and growth of the company in general. Buy custom Graff - Pinkert Case Study essay

Definition and Examples of Dynamic Verbs

Definition and Examples of Dynamic Verbs In English grammar, a dynamic verb is a  verb used primarily to indicate an action, process, or sensation as opposed to a state. Also called an action verb or an event verb. Also known as  a  non-stative verb or  action verb.  Contrast with stative verb. There are three major types of dynamic verbs: 1) accomplishment verbs (expressing action that has a logical endpoint), 2) achievement verbs (expressing action that occurs instantaneously), and 3) activity verbs (expressing action that can go on for an indefinite period of time). Examples and Observations They throw the ball, I hit it.They hit the ball, I catch it.(Hall of Fame baseball player Willie Mays)He had learned to walk and run and fight in the twisting alleys and dirty gutters of Rome.(Howard Fast, Spartacus. Blue Heron Press, 1951)I ate a banana and drank a glass of nonfat chocolate milk for breakfast. After that, I washed the breakfast dishes with liquid soap and lemon juice. I threw them in the dish drainer so they could dry naturally and left the house.(Lori Aurelia Williams, Broken China. Simon Schuster, 2006)They roared and clapped, sang and shouted as I performed, and with each moment my heart filled fuller.(Emmanuel Jal, War Child: A Child Soldiers Story. St. Martins Griffin, 2010)America is a large, friendly dog in a very small room. Every time it wags its tail, it knocks over a chair.(Arnold Toynbee, BBC news summary, July 14, 1954)[I]n summer everything fills. The day itself widens and stretches almost around the clock; these are very high latitudes, higher than L abradors. You want to run all night. Summer people move into the houses that had stood empty, unseen, and unnoticed all winter. The gulls scream all day and smash cockles; by August they are bringing the kids.(Annie Dillard, Mirages, 1982) Brandt ran back to the deepest corner of the outfield grass, the ball descended beyond his reach and struck in the crotch where the bullpen met the wall, bounced chunkily, and vanished.(John Updike, Hub Fans Bid Kid Adieu, 1960)Verbs act. Verbs move. Verbs do. Verbs strike, soothe, grin, cry, exasperate, decline, fly, hurt, and heal. Verbs make writing go, and they matter more to our language than any other part of speech.(Donald Hall and Sven Birkerts, Writing Well, 9th ed. Longman, 1997) Whats the Difference Between a Dynamic Verb and a Stative Verb? A dynamic verb (such as  run, ride, grow, throw) is primarily used to indicate an action, process, or sensation. In contrast, a stative verb (such as be, have, seem, know) is primarily used to describe a state or situation. (Because the boundary between dynamic and stative verbs can be fuzzy, its generally more useful to talk of dynamic and stative meaning and usage.) Three Classes of Dynamic Verbs If a​  clause can be used to answer the question What happened?, it contains a non-stative (dynamic) verb. If a clause cannot be so used, it contains a stative verb. . . . It is now accepted practice to divide dynamic verbs into three classes. . . . Activity, accomplishment and achievement verbs all denote events. Activities denote events with no built-in boundary and stretching out over time. Achievements denote events conceived of as occupying no time at all. Accomplishments denote events with an activity phase and a closure phase; they can be spread out over time, but there is a built-in boundary.(Jim Miller, An Introduction to English Syntax. Edinburgh University  Press, 2002)

International Human Resource Management Essay Example | Topics and Well Written Essays - 3250 words

International Human Resource Management - Essay Example Competent and highly skilled workers are necessary. Above all, the corporation must be sensitive to the culture of peoples where it is operating as well as the culture of people they are serving. This is an essay that will explicate international human resource management (IHRM) from the theoretical vantage of culture to determine strategic performance management and its competitive advantage amid contextual changes. The researcher will also explicate culture within the context of diversity in relation to IHRM amid challenges in international business operations, citing Marrriot International Inc., as an example. But before going further, it’s necessary to first define some relevant terminologies that is thematically used in this study. International refers to a scope of affairs that is involving two or more countries. Human resource management, on the other hand, refers to a system relating to hiring or employing, training, designating, performance managing and appraising emp loyees’ performance (Jackson, Lafasto, Schultz, and Kelly, 1992). Culture also refers to beliefs, values and customs that are integral and are influential in their decision-makings, style of leadership and on how relations are managed (Pettigrew, 1979). Internal and external conditions are maybe influential to person’s emotional and psychological make up but its culture that molded persons’ perceptions, behaviors, organizational management, working relations and evening systems of operations (Pettigrew, 1979). Like external and internal environments, culture is undergoing continual change. HR policies and procedures therefore must be adjusted to cope with this change. Human Resource Management and Diversity Armstrong (2006) explained that human resource relate to management’s system where workers perform tasks to contribute to the achievement of corporation’s goals by employing persons, enhancing their skills, maximizing their capacities in exchang e for just compensation for services rendered. Managers value performance and evaluate worker’s performance based on corporate standards as part of career development and employ coaching or feedback mechanism for the improvement of performance (Schneier and Beatty, 1979). HRM is essential in corporation's growth and in retaining competitive advantage thus, the need to capitalize superior human resource management. Consequentially, the increasing demand require High Performance Work Practices by ensuring that workers are hired through criteria of procedures; with compensation and incentives based on performance standards. It also encourage or mandate labor forces participation in production and decision-making as well as provide them skills to enhance their knowledge, abilities to improve their motivation (Delaney and Huselid, 1996). Thus, companies must have standard to manage worker’s performance to contribute quality results for the organization (Lingle and Schiemann , 1996: 56-61; de Waal and Coevert, 2007: 317-416) that measures efficiency and effectiveness of workers. It also involved managing organization, administering of personnel, management to manpower. The system fundamentally consider that HR works to meet needs and goals but also

Summarize Taylor article Example | Topics and Well Written Essays - 250 words

Summarize Taylor - Article Example of preserving some form of status quo that management is comfortable that it divests an efficient worker of his potential to produce more than what is expected of him. These attitudes become a problem since it cultivates a culture where the labor force stagnate instead of grow. Scientific management is a solution offered by Taylor where it seeks to cultivate a new form of mentality where there is a new manner of setting an equilibrium that integrates the worth of the working man with the aid of efficiency that technology can provide. He offers four principles which starts with the assimilation of new set of ideals that have worked in the past to formulate a better set of understanding that will yield improved results. The next puts focus on establishing skilled managers who will guide in the new way of administrating the principle of scientific management. Perhaps the most important of these principles is the third which is the bringing together of science and man to a common goal. The final principle is what differentiates it from all other which is the division of work which gives direct correlation to the significance of technology in improving output while keeping the working man assured of his worth in the production process

How a society could improve its functionality Essay

How a society could improve its functionality - Essay Example One of the long-term benefits of this theory is that behaviours are improved to suit the majority after they are treated with. Therefore, deviant behaviours that disrupt the social norms are then adjusted to be capable of bonding much more strongly to the society. Deviation that takes place in any society is because people experience different types of social pressure, that restrict the preferences when an individual performing any action practically (Howe, 1987). Lately, it was becoming increasingly doubtful whether this theory will ever see the psycho-social view. The reason is that Goldschmidt discussed in the book; 'the anti-historic approach made it impossible to examine social processes, rejection of psychology made it impossible to understand attitudes and sentiments, and the rejection of culture led to a lack of recognition of the ecological context' . Thus, now the fixers approach social systems in all three types psycho-socially, behaviourally and/or functionally (Howe, 1987). Psychoanalysis helps by reflecting the situations a person faced during his/her childhood and behaviourally it is concentrating on problems during that time period. While sociologically, functionalism ensures that social order doesn't overrule stability as Brown defines in his book. 'The continuity of the social structure is not destroyed by changes in the units'. People, who have been isolated by the society, are treated by helping them develop the relationsh ip with the society. Fixers of the society face problems like individually induced pathology, systems failure and others. Whereas, the limitations faced by fixer theory is rather concerned with the scientific methods, which is arguable, as uses implies that the people living in the physical world are objectively real. It can be successfully observed through conducting social analysis or interviews. Conversely, if the society lacks the consistency to stabilize the culturally suitable behaviours or norms, there are several social control mechanisms which restore this conformity. The control mechanisms ensure functional consistency, by restoring it or isolating the ones who don't obey the rules. But according to Brown 'this limits the value of human rights to live as they would like to'. They are seen merely as objects rather than individuals. The functionalist theory is oblivious to the natural and historical process, so it assumes that societies are meant to be in equilibrium. This helped the functionalists to predict the place of an individual in a social system along with the expectations which are supposed to be fulfilled. In other words, it means that every individual's behaviour can be predicted scientifically! In spite of all this, sociologists believe that they can understand the laws, which define the behaviours of a society. Although, this serves as an incentive for further research on this subject, while the objective analysis may not completely comprehend the social phenomena in the long run. References: Howe. D. 1987. Introduction to Social Work Theory. Revised Edition. UK. Publisher: Ashgate. Brown. R & Kuper.A. 1977. The Social Anthropology of Radcliffe-Brown. Edition:

Life Before the Internet vs. After the Internet Essay

Life Before the Internet vs. After the Internet - Essay Example Internet is a phrase with loosely relates to the inter connection of people who are in different parts of the world and are connected to one another through wireless means. Internet has become a family and its users being the members of the family. Outline: The aim of this paper is to specify the differences between the two epochs of history, the pre internet era and post, and see how they have impacted the life of individuals, society and organizations in general. Thesis Statement: The empowered man of internet era vs. the novice man of pre internet era. Journey from Stone Age to Industrial era: While the earlier era was characterized by formal, conventional and simple methods where simple life styles were in progress, it was changed and developed towards the 18th century when industrial revolution took place and made human being more dependent upon others and made them realize that a joint communication setup is needed which can facilitate them in a more suitable way. The internet is no more than a medium for facilitation of mankind in their daily activities and functions. The journey forward: 1990s was the era when the common citizens for the first time got familiar with the concept of internet. However the term internet was around since 1970s, however at that time the interface was only limited to defense purposes and governmental usage. With time internet’s reach became possible to the common man, while at one time it was limited to only institutions and governmental organizations, by late 1990s, it became part of almost every house, and in early 21st century it became part of every mobile phone and every gadget that is around. The digital media such as the broadband telephone systems and all the mobile phones that are around us are gift of internet and technology. Internet is dependent on these technologies and these technologies are dependent on the internet. These two serve as complementing factor towards each other and facilitate the existence a nd working of one another. It is the broadband technologies enabled by optical fiber and wireless communications that make communication possible and internet a reality. Without these underlying elements of broadband technologies internet services would not be achievable. A visible line can be drawn in terms of the era prior to internet and era that is dominated by the presence of internet. Traditional telephone systems and pre internet era: Prior to internet the conventional telephone systems were in place. These were equipped with wires, heavy infrastructure and telephone sets. Internet has facilitated all This in a new manner and VOIP function is a characteristic of internet era which has removed the need for a conventional telephone system and allows people getting connected on the spot and mostly these calls are free as well and do not charge anything. A mere download of software enables getting connected with the people in far areas. The advent of internet has brought about ma ssive changes in the manner in which activities are being held. Broad areas can be highlighted in terms of the following factors: Type of communication that was in place prior to internet and in era of internet, The time factor The speed factor, i.e. the speed with which the messages can be conveyed, The

Adam de la Halle Essay Example | Topics and Well Written Essays - 4500 words

Adam de la Halle - Essay Example Although his poetry is indicative of possible aspects of his life, it is impossible to distinguish what is art, what is fiction, and which of the different aspects reflect his life ad which reflect that of his patrons. He died in 1288 and it is estimated that he was in his late forties or early fifties at this time (Marshall and de la Halle). Le Jeu de Robin et Marion According to Dane, â€Å"Le Jeu de Robin et Marion is among the first secular vernacular dramas. It is in part a dramatization of the medieval lyric pastourelle (a quasi-dramatic lyric type involving an encounter between a knight and peasant)† (49). The piece was written in French and represents the social opposition in which the story of Robin Hood is most often thematically written. The presentation of the play is only available through hypotheticals, a given representation not having been passed down in history, although it is considered the historic example of the beginnings of the comic opera. The music is h ighly rhythmic and representative of medieval troubadour music. Fi maris The chanson is courtly music that is â€Å"about love, rather than love songs in any Romantic sense† (Marshall and de la Halle 3). ... He did not, like a Romantic poet, reach out for the universal from a basis of personal experience† (Marshall and de la Halle 4). Fi Maris is written to express a witty look at infidelity and is written in French. Its monophonic tone and rhythmic background with harmonic vocals supply the form of the piece. Je muir, je muir d’amourete Je muir, je muir d’amourete is a rondeau, meaning that it had a rigid structure in which the verse and the refrain are repeated, from which the poetic rhythm scheme can be translated as AbaAabAB. Formed from the monophonic traditions, this piece is a gentle and sentimental work that has a beautiful introduction. The repetition sets up a sense of the emotions of the work. It is in French, with a gentleness that brings forward a meaning that is beyond the lyrical translation. Works Cited Dane, Joseph A. Abstractions of Evidence in the Study of Manuscripts and Early Printed Books. Farnham, England: Ashgate Pub, 2009. Print. Fi Maris. You tube.com. 24 September 2010. Lumina Vocal Ensemble. 11 June 2011. http://www.youtube.com/watch?v=NnDZrJLJ2uk Je muir, je muir d’amourete. Youtube.com. 26 July 2010. Quellidelgiardino. 11 June 2011. http://www.youtube.com/watch?v=d8MbPkdIppc Le Jeu de Robin et Marion. Youtube.com 17 May 2010. Cowboybepopp444. 11 June 2011. http://www.youtube.com/watch?v=n_ENI8s6tgY &feature=related Marshall, John H. and Adam de la Halle. The Chansons of Adam de la Halle. Manchester: Manchester University Press, 1971. Print. Claudio Monteverdi Claudio Monteverdi was born in 1567 and died in 1643 and was a composer, singer, and musician playing the viola da gambe. His work can be considered for its transitional position between the Renaissance

Life Before the Internet vs. After the Internet Essay

Life Before the Internet vs. After the Internet - Essay Example Internet is a phrase with loosely relates to the inter connection of people who are in different parts of the world and are connected to one another through wireless means. Internet has become a family and its users being the members of the family. Outline: The aim of this paper is to specify the differences between the two epochs of history, the pre internet era and post, and see how they have impacted the life of individuals, society and organizations in general. Thesis Statement: The empowered man of internet era vs. the novice man of pre internet era. Journey from Stone Age to Industrial era: While the earlier era was characterized by formal, conventional and simple methods where simple life styles were in progress, it was changed and developed towards the 18th century when industrial revolution took place and made human being more dependent upon others and made them realize that a joint communication setup is needed which can facilitate them in a more suitable way. The internet is no more than a medium for facilitation of mankind in their daily activities and functions. The journey forward: 1990s was the era when the common citizens for the first time got familiar with the concept of internet. However the term internet was around since 1970s, however at that time the interface was only limited to defense purposes and governmental usage. With time internet’s reach became possible to the common man, while at one time it was limited to only institutions and governmental organizations, by late 1990s, it became part of almost every house, and in early 21st century it became part of every mobile phone and every gadget that is around. The digital media such as the broadband telephone systems and all the mobile phones that are around us are gift of internet and technology. Internet is dependent on these technologies and these technologies are dependent on the internet. These two serve as complementing factor towards each other and facilitate the existence a nd working of one another. It is the broadband technologies enabled by optical fiber and wireless communications that make communication possible and internet a reality. Without these underlying elements of broadband technologies internet services would not be achievable. A visible line can be drawn in terms of the era prior to internet and era that is dominated by the presence of internet. Traditional telephone systems and pre internet era: Prior to internet the conventional telephone systems were in place. These were equipped with wires, heavy infrastructure and telephone sets. Internet has facilitated all This in a new manner and VOIP function is a characteristic of internet era which has removed the need for a conventional telephone system and allows people getting connected on the spot and mostly these calls are free as well and do not charge anything. A mere download of software enables getting connected with the people in far areas. The advent of internet has brought about ma ssive changes in the manner in which activities are being held. Broad areas can be highlighted in terms of the following factors: Type of communication that was in place prior to internet and in era of internet, The time factor The speed factor, i.e. the speed with which the messages can be conveyed, The

Corporate Logos and Their Change in Design over the Years Research Paper

Corporate Logos and Their Change in Design over the Years - Research Paper Example The researcher states that Jim Nash made a black and white headshot of Quaker Man in 1946. This eliminated the other constituents of Quaker Man’s body which symbolized a more focus in providing the higher quality of products, matched with a smiling facial expression that conveyed a more positive outlook towards the consumers. In 1957, Haddon Sundblom painted a colored version of Quaker Man’s headshot which was used up until the recent times. In 1972, the company logo produced a radically redesigned monochromatic logo by Saul Bass. This signified a unified company, which embodies one single goal patterned after the honest and true values of the owners. However, as the company approached the contemporary era, the logo was shifted back to Sundblom’s original version, with a bigger Quaker word and an embossed gold border surrounding the headshot of Quaker Man. Recently, Quaker introduced a new logo set in Archer typeface, which is popularized by Hoefler and Frere-Jon es. The typical all-caps company name was replaced by a new font style that shows a simple and friendly ambiance. The Quaker Man was moved from the center portion of the logo to the inner portion of the letter Q. This was made after Quaker introduced a new line of tasty delights as they continue to venture into the global market. The logo produced a rather interesting message that is both eye-catching and message instilling. The Visa logo was typically shown in a flag design with the colors blue, white and gold. The blue and gold colors were associated with the blue skies and the golden hills of California, where the BankAmericard originated. At the company’s early times, Visa was originally a lending instrument that provided aid for people who are in need of financial assistance.

Fashion marketing Essay Example for Free

Fashion marketing Essay Fashion marketing over the years has changed considerably. This has been due to number reasons which include culture, lifestyles, technology and the media. A case student of a student will be used. Culture is a link between three components: what people think, what they do, and the  material products they produce but also has the property of shaping behaviour and  consciousness within a human society   (Hofstede, 2001) Fashion marketing and culture are closely linked.  People who are members of the same culture, most of the times have an unwritten code  between them for many sectors of their life social and private. Eskimos are a great example  of such unusual habits, which offer their wife to their visitor during the first night and they  simply mean Thank you with this gesture. Moreover, people around the world use different  movements of their face, hands and body to express their feelings and a foreign student might  feel embarrassed, annoyed or shocked when encounters incidents like the one mentioned  above or ones that are totally new and beyond his expectations. Read more: Fashion essay A Student may face  difficulties to adapt to the climate of the new country as well, which might be too warm or  too cold for the standards of his home town. Additionally, the food most probably will be  different and this may make him feel sick or enthusiast about this. The most important aspect  of a foreign students life will be the educational system and fashion, which may differ from  the relationship between teacher and student, to the way the courses are being taught and  gaining employment in the fashion industry due to different cultural norms and values. The  general   rule of thumb at this point is that, after a period of time, the culture abroad may  now come the normal way of living . The feelings, that have arisen from this whole  situation of encountering a new culture, are distinctly different to what had been witnessed in  Bulgaria. The most efficient way for a foreigner, student or traveller, before come into  contact with another culture is to be prepared about the variation among cultures and fashion  trends. One must notice that if a stranger meets another culture, but put aside any egoistic  feelings that might have, which do not let him understand the different lifestyles among  people, will only gain from this interaction. Nowadays, that many countries become multi-  cultural, it is important for the locals and the foreigners to try cooperating with each other in  order both of them to live smoothly together. (Hofstede, 2001) The term fashion holistically covers a plethora of different trends and styles. It has been  observed in the UK that many people dress to impress and others dress for attention purposes.  Youngsters in the UK are becoming more and more fashionable and are becoming conscious  of new trends and styles. People in the UK always strive to look their best which is  painstakingly different to what it is like in Bulgaria where they seem reasonably content with  whatever they wear. Whether people in the UK dress smartly, wearing the latest designer  labels that cost a fortune or whether they wear black Gothic clothes and cover their faces in  thick make up, they take pride in their appearance which seems like a cultural norm in the  UK.   (Connor, 1997)

Opinion Of Employees Of Nishat Apparel Division Commerce Essay

Opinion Of Employees Of Nishat Apparel Division Commerce Essay This report entails the details for the methods being used to conduct the research and to reach a conclusion and findings for the prevailing research problem of employee turnover in Nishat Apparel Division. It starts with an overview of company and its operations, global domestic overview and the overall textile industry overview. It also incorporates the competitor analysis of the company. This report explains the Textile industry scenario of Pakistan and its growth prospective such that what are the government policies and regulations for this sector, if they exist. Competitor analysis is done while considering two competitors that is, Masood Apparel Ltd and sapphire textiles Ltd. Literature Review has been done from various journals, articles and published articles. Firstly, the textile industry is explained, then the Human Resource Management is taken into consideration which is the area of interest and then the research problem is discussed through articles. Furthermore, the Research question along with the research methodology including the sample size, variables regarding the research problem, research design and limitations of the research are presented. The findings and Analysis on the primary research is discussed in detail which mainly purports to the basic research. All the factors and reasons leading to employee turnover in this particular firm are mentioned which leads to the overall analysis of the research and findings. The results being mentioned are from all the sources that were useful in conducting this research. In the end, Conclusion and recommendations is given along with the sample of questionnaire being used to get the opinion of employees of Nishat Apparel Division. COMPANY PROFILE NISHAT GROUP Nishat Mills is a public limited company that comes under the domain of Nishat Group. It was incepted in 1948 by Manshas father Mian Mohammad and his three brothers and is one of the top five business houses in Pakistan. The groups journey started plausibly but cascaded down the road of success to earn the existing dynamic reputation, over the years, under the legendary leadership of Mian Mohammad Mansha. The group has spread its roots in almost all leading sectors of economy and by far is the most eminent player in every sector, it operates in. It has no parallel when it comes to comparison in terms of diversification with other groups. Its exalted position is narrated by the presence of following companies under the groups flagship. SECTOR COMPANY Textile Nishat Mills Insurance Adam Jee and Security General Banking MCB Construction (Cement) D.G. Khan Cement Power Generation Pakgen Power Limited Paper Products Nishat Shoaiba Paper Mills Aviation Phonix Aviation Source: Nishat Mills Limited Company Website; www.nishatmillsltd.com (2012) Although all these companies are acclaimed but the three prominent among them are Nishat Mills, MCB and D.G Khan Cement. The group is renowned as a multinational operating locally, with products, services and management skills superior to all other competitors. Currently, Nishat comprises of 21 companies out of which 13 are listed with manufacturing assets worth Rs. 27 billion. Nishat Textile Mills was established in 1951 where as first power unit was set up in 1995 by the group. Muslim commercial Bank was acquired in 1991 and now has over 1200 branches with more than 12000 employees. Nishat Group has been the largest exporter of textile products from Pakistan since a decade with total exports of Rs.36.015 billion in the year 2011. INTRODUCTION NISHAT TEXTILE MILLS Nishat Mills is the largest vertically integrated textile company in Pakistan. It is one of the largest manufacturers and exporters of textiles. It primarily exports fabric to American and European countries where it is used by acclaimed brands such as GAP, DKNY, Tommy Hilfiger, Old Navy, CHAPS, and Sears etc. It employs latest technology from Europe, Japan and USA and obtains synergies from local companies when its a necessity for them to outsource the raw material or yarn. The capacity for large scale production is met with 198,120 spindles, 670 air jet looms and finishing capacity of 7 million meters fabric per year. The company is equipped with latest dyeing and processing units including 2 stitching units for home textile, 1 stitching unit for garments and power generation facilities of 89 MW. The progress and expansion of Nishat Textile Mills over the years is shown in the table: Source: Nishat Mills Limited Company Website; www.nishatmillsltd.com (2012) Over the past decades, the company climbed the ladder of success under a dedicated and motivated management team. The vision and mission statements were rephrased several times but they revolved around the same objective of serving the customers and country. MISSION STATEMENT To provide quality products to customers and explore new markets to promote/expand sales of the Company through good governance and foster a sound and dynamic team, so as to achieve optimum prices of products of the Company for sustainable and equitable growth and prosperity of the Company. VISION STATEMENT To transform the Company into a modern and dynamic yarn, cloth and processed cloth and finished product manufacturing Company that is fully equipped to play a meaningful role on sustainable basis in the economy of Pakistan. To transform the Company into a modern and dynamic power generating Company that is fully equipped to play a meaningful role on sustainable basis in the economy of Pakistan. AWARDS AND CERTIFICATIONS Under the banner of Nishat Group and due to the relentless efforts of the management team, Nishat Mills attained following milestones. Federation of Pakistan Chambers of Commerce and Industry (FPCCI) Export Performance Trophy ISO-9001 certification IKO-TEXÂ   100 certification SA-8000 certification City pad certification MEMBERSHIPS Nishat Mills Limited is a member company of the following Industry Associations and Trade Bodies:Â   All Pakistan Textile Mills Association (APTMA) All Pakistan Bed sheets Upholstery Manufacturers Association (APBUMA) Pakistan Readymade Garments Manufacturers and Export Association (PRGMEA) Pakistan Textiles Exporters Association (PTEA) The Federation of Pakistan Chambers of Commerce and Industry (FPCCI) The Lahore Chamber of Commerce and Industry (LCCI) Karachi Chamber of Commerce and Industry (KCCI) The Faisalabad Chamber of Commerce and Industry (FCCI) NISHAT APPAREL LIMITED Nishat Apparel was incorporated in 2005 as a public limited company. The company is equipped with state of art plant and equipment for handling all kinds of Woven Bottom made ups. Nishats decades of experience in the textile industry sets Nishat Apparel firmly above its competitors for its dedication towards quality and efficiency. Now Nishat apparel is a leading manufacturer and exporter to all the Worlds major brands of Woven Bottoms. Mr. Faisal Naseem, director operations is looking after Nishat Apparel. Nishat Apparel brings a blend of dedication and commitment towards its customers. This is achieved by offering premium services ranging from thread and fabric selections to the manufacturing of the products and providing the best quality to its customers on their demands. VISION People at Nishat Apparel are committed: To do what is right, to be a good neighbor and partner in their community, to conduct their business with an environment friendly manner, to provide fair return to society, employees and stake holders, and to conduct business with employee, customers, suppliers and all other based on honest, fair and equitable basis. DEPARTMENTS PROCESS FLOW DEPARTMENTS PROCESS FLOW AT NISHAT APPAREL GATE OFFICE Gate office mainly controls the flow of materials that enter into and out of the factory. Without their permission, no materials enter into the factory and no department accepts any material without the entry stamp from the main gate. The remaining process takes place afterwards. OGP stands for Outward Gate Pass and IGP stands for Inward Gate Pass. Gate Office basically verifies the OGP. Then Receipt room is there to verify each and everything by looking both the various components. Here, purchase order is received which consists of all details. They handle internal control procedures in company transfer system (non-returnable materials) like donation, transfer, credit, cash and loan. Gate office has the responsibility to completely verify the item; if they dont give the permission the security will not clear that item. First there is demand and then Purchase order. It includes Challan Invoice. Invoice details are being verified against the PO number. If purchase order is written then it is entered immediately. In case, it is not written then via email this is informed to concerned department and is again sent to the gate office so that they can actually put their stamp on it. And that PO number can be generated. Entry of both fabric and components take place which go to fabric room and to the receipt room, respectively. After they assign IGP (inward gate pass) number, second procedure is to assign GIN (good inspection note) number. The gate office has the authority both to sample and check one by one the quantity of goods. When they approved the item against purchase order, the software automatically generate IGP number, which they write on documents and sent to the receipt department. Cartons by suppliers go directly to the receipt room. There is no specific number of deliveries. If sometimes the delivery does not match then it is kept by gate office and is kept pending, unless and until the concerned department responds. And the concerned department sometimes takes too long.OGP is of two types that is, Returnable and Non Returnable. Payment adjustment and documentation start with gate office and outgoing items end with gate office and documentation done from it. RECEIPT ROOM First physical inspection of inward material is received and IGP is generated by the Gate Office. The three documents being received are Invoice, Delivery Challan and Packing List with material. Physical Inspection may result into following outcomes: Excess, Shortfall, and Rejection. In case of Excess: the items become property of GNA and are sent to store room. For Shortfall: Receipt Room intimates concerned department and also the supplier and the IGP is sent back to the Gate Office for correction. And for Rejection: Receipt Room holds the goods and intimates concerned department which verifies and guides the receipt room for acceptance or simply sending the material back to the supplier. OGP is then generated by the store room, in case; the items have to be sent back to the supplier. On acceptance, GRN number is generated, GRN stands for goods received and inspection note. All GRNs are collected by store room and concerned department. Signed IGP will be sent back to the Gate Office who is responsible for signatures required on the form. PROBLEMS Counting very small items with large number takes a lot of time in Quality Inspection, for example, Tags which need to be counted on a weight scale also needs to be checked for Bar Code, Line number and Size written on it. STORE ROOM In this particular department, materials like thread, zip, buttons and many other required things needed to make a garment are held in an inventory form. It provides each and everything related to making of a final product starting from a fabric to a needle. Main store department provides the accessories and fabric department provides the fabric to the cutting section. Basically merchant passes demand for coding which is by size, shade and tex wise. After coding the same demand goes to the purchaser and then purchaser purchases from the concerned supplier. The order follows as: The material which came from the supplier regarding the purchase orders and other items which are used in the factory get approve at the gate and the gate office provide the IGP (Inward gate pass) number. After approval from the gate office the material is sent to the receipt section in which they check the quantity of materials which they require for the order and then quality inspector from the MMC check the quality of materials. Afterwards, GRN number is assigned to the inventory and then the materials are sent to the inventory store. The staff, present in the store room takes the material from the receipt section to the main store and then they check the quantity and place the materials in the shelves. And then all the information regarding the inventory is entered into the computer concerning mentioned specifications. In order to issue the material, SIR is required from production department and that SIR is signed by both who receive the material and who issue the material. SIR stands for Store Issue Request and it includes the item codes, description, location and quantity. Before issuing the material to specific department, all details are checked from the computer regarding the demand from the specific department and then material is issued to that concerned department. In this particular department complete record is kept for convenience. Also, check and balance takes place monthly in order to remain up to date about the material being stored as an inventory and the remaining being issued to other departments. Every item has its own GRN. According to this GRN, Demand is fulfilled such as demand of threads, zippers, buttons, etc. Threads thickness is checked according to tex that can be 40, 27, etc. Lastly, finishing and packing takes place and for this there is a separate store named as Basement Store. MATERIAL, MANAGEMENT CONTROL DEPARTMENT When the customer books order, it is the marketing department that provides all details. All specifications and requirements of trims and other things are provided in the form of the demand. PPIC raises demand to the Material, Management Control (MMC) department. MMC department physically deals with the supplier and purchase the materials according to requirement of the order. MMC is done for the material procurement like fabrics and accessories. Trims are referred to as accessories. MMC accessories deals with supplier regarding the materials used in the garments except fabric like threads, zip, labels, tag, washing label, hangers, button, rivets etc. If the customer is giving nomination and a code or a PI that is, purchase invoice, then it is the duty of MMC department to check and verify all the rates listed on that. After the verification of the prices and the codes, an order is placed. In Nishat Apparel, lead times regarding the foreign countries is 14 to 16 days. Whenever the document has to be received, it is first given to the gate office, then to receipt room and from there to the warehouse. GNM is generated and then each piece arrives for an approval. If code is written on it then it is an easy task to simply check that. In case, the code is not written on it then the packing is checked as usually the codes are written on the packs. Also, if any problem arises during the audit or any other process then the sole responsibility is on the customer. MMC fabric deals with supplier regarding the fabrics about how much quantity they need for the completion of the order and also what quality the customer desires. Nominated Supplier is the one who is bound to buy from the buyer supplier. Whereas, Non- nominated Supplier is the one who can purchase or collect fabrics from anywhere but the quality match according to the customer requirement. PRODUCT DEVELOPMENT DEPARTMENT Primary objective of PD is to establish a set up to understand the designs of products and make it easier to understand for production people. Two types of approaches are used at PD: Reactive and Proactive. Reactive approach has nothing to do with marketing research regarding new fashion and upcoming designs. Client himself does this research and provides the design as a tech pack and PD only copies that design on behalf of the client. Proactive approach involves self designing and then taking those designs to international exhibitions and get orders from different clients. Here, the unit shows its capacity and research work which makes the clients life easier if they like the designs and PD can make profits for the company by its work. For this purpose, PD studies the last 4 to 5 years trends and customers related market segments to analyze and design according to the customers taste. PD is just like a factory within a factory. They develop samples, raise demands for their required materials, develop commercial samples and then take them to international exhibitions. PD interacts with marketing, PPIC, and Production to run its business. Product development has different sections: Technical services, Design Cell and Sampling. Technical services department maintains four types of documents: Manufacturing Specs, Trim Cards (Both pre wash and after wash but all Pre cuts), Trim Issuance Sheet and Fabric Card. Manufacturing Specs includes: Style Brief, Fabric and Wash Detail, Trim and sundries details, Thread and construction detail. Sequence of Operations is very important for an assembly line and if it is changed very frequently then production cost increases tremendously. It is mentioned in the thread and construction details within manufacturing specs. It is considered very important and is an individual document which is not linked with any other document. Fabric card and trim card as obvious from the names has the cutting of fabric and all the trims including pre wash and after wash are fixed as a sample record. Fabric selection is also very critical both for body and pocketing. Designers start their working from a rigid cloth and take samples as leg panels are leg tubes for washing, stitching, embroidery etc. Almost 70-80 articles are prepared every year. These designs are then presented in different exhibitions internationally and customers pick designs of their choice and place orders. In this way design cell brings business to Nishat Apparel and contribute in profits. Sampling is just like a small production house where commercial samples are prepared. These samples are very important for winning the orders therefore it has been kept separate from bulk production house so that attention to details can be paid. CUTTING DEPARTMENT Nishat Apparel is well equipped to handle the complete cycle with state-of-the-art machinery and experienced teams handling each and every detail of process in production. Currently the manufacturing capacity is 600,000 garments per month. Software being used to design markers for automatic or manual cutting is four Gerber Spreader Machines, capable of spreading eight layers of fabric in a lay, two Gerber high speed heavy duty automatic cutting machines, and two Gerber plotters for printing the cutting markers. The cutting department mainly aims at quality control and minimizing wastage. Cutting is divided into three basic areas that are spreading, cutting and binding. The cutting department spread the fabrics according to the size chart and Fid report. They prepare the size chart of the fabric, their sizes, width and shrinkage. The spread is of same length. And according to the length of fabrics all the details are fed on to the spreading machine. For shrinkage purpose they add some margin in length. Below the fabric on the spreading machine, they have punching papers that have holes within it. After spreading, the fabric is moved through pressure machines to the cutting department. In every piece cut, there is front panel, back panel, single fly, double fly, front pocket bag, 2 belts, loops, 2 yokes, coin pocket and other major things. SEWING DEPARTMENT Currently, there are 22 sewing lines with 65 machines in each of the line totaling 1430 machines. A normal eight hour production shift is capable of preparing 30,000Pcs/Shift/Per day. There are 4 sections in sewing section. They are Back section, Front section, Assembly 1 and Assembly 2. Quality inspector at the end of the assembly checks the quality. Leather patch and then WIP passes the garments to the washing section and they wash the garments according to customer requirement. After leather patch WIP count the pieces and then sent them into the washing section. There are different types of machines and threads which are used in stitching to perform the operations such as, Lock machine and Chain machine. Tex of the thread and stitches per length is decided by product development. Tex is basically a standard of measurement of thickness of thread. They use 40 Tex, 60 Tex, 105 Tex and 80 Tex for the finest quality and for strength. INDUSTRIAL ENGINEERING DEPARTMENT Two types of costing sheets are sent to this department by the marketing department namely, Sketch and Sample. In sketch sheet, pictures and some other minor details are represented whereas; in sample there are no pictures. IE department gives information such as, estimate of how much meter of garments is required and how much minutes are required to complete the assigned task. This is done with the help of SMV which is Standard Minute Value. The main aim of this department is to reduce the unnecessary time of the garment and also to suggest an easy method for the bulk production. Hence, an accurate and correct assumption is given by them. This department does its work in collaboration with the marketing department. This department prepares a sheet known as Operation Breakdown Sheet. Here, SMV is calculated operation wise and target per hour in accordance to machine. Activity sampling method is used for the calculation of productivity and non-productivity time. There are total 22 lines each having 65 machines with extra 16 helpers in total. Total working hours defined for the labor is 8 hours a day. IE is actually helping production line. By doing the time study, production study and capacity study, the problems can be identified. And if there are any bottlenecks then IE is there to solve it. At the same time, weekly efficiency report is prepared by this department. Therefore it can be stated that IE suggests which operations are suitable and which are not and calculates consumption and layout sequence. GARMENT WET PROCESS (GWP) DEPARTMENT At Nishat Apparel, GWP performs various tasks, including finishing washes and fabric trimming. There are both washing machines and dryers. Washing section is basically the technical department which add the effects and shading in garment. Garments are prepared for sampling, add the effects if required and sent to the respective department. The samples are prepared for the approval from the customers and if the samples are approved by the customer then they prepare the bulk quantity of the garment. Scrapping and all other effects are done before washing and all chemicals are used separately. 3 times wash is required for DENIM garment and 1 time wash for TWILL. For DENIM dying 2-3 hours are required and for TWILL 45 minutes are required for dying. And 3% error is acceptable all over the factory. While the following washes are available in a variety of possible combinations. The types of washes available in Nishat Apparel are as follows: Enzyme washing, Bleach wash, Over dyeing (direct dyeing), Garment Dyeing, Garment wash (Rinse + Softener wash), Tinting, and by washes (acid enzymes). PRODUCTION, PLANNING, IMPLEMENTATION CONTROL DEPARTMENT The production planning and control department plays a vital role in the massive operations of Nishat Apparel. Their forecasting and scheduling skills assist in determining the production specifications which are devised to satisfy the expectation and demands of our clients completely. Placement and planning of the material is done by PPIC. PPIC prepare all plan regarding the flow of materials from feeding to finishing section. It receives information from the merchandiser and link it the production. The PPIC department links with the FID (Fabric Inspection Department), CAD (Computer Aided Design) for making the marker, Cutting (issuing fabric), WIP (work in process) PPIC sub department, IE department, Sewing Department, Quality Assurance Department, GWP (Garment Wet Process), Finishing (trimming, button, zip, pressing) and Packing area (dispatching). Customer tells the order to the marketing department and then marketing department asks PPIC whether this order can be taken or not. PPIC then looks for the capacity and if it is more the order can be taken otherwise not. Afterwards marketing department negotiates with the respective customer. After the confirmation of the orders, meaning that induction date and the ex-factory dates get decided, the procurement gets started and PPIC plans about the percentage at which the material requirement is planned. If shipment date gets delayed due to any reason, it is the sole responsibility of the PPIC department. Therefore, it is there to implement and control as well. PPIC is actually monitoring the balancing. Work in Process (WIP) is there for controlling. Sometimes the order is delivered on time but even then the problem arises. This might be due to the reason that the material is defected. So, here PPIC plays the major role by raising the shipment alarm. If the other party negotiates well then its better otherwise the company has to bear a loss. This is very rare but again PPIC will be responsible. For a planner to achieve success it is very important to know: What is going wrong? What can go wrong? FINISHING, PACKING SHIPPING In tag section, tags and label are attached to the garments. Washing labels are then attached and extra buttons are included. This is ensured that the garments are packed properly and free of any flaws or defects. Even the possibility of minute needle fragment in the garments is not overlooked; every garment is magnetically scanned through the needle detector. Again, if it is the demand from the customer only then it is passed through the needle detector, otherwise, there is as such no need. In the non-needle zone area, the shade master separates the garments according to the shading and sizes. There is buyer scanning software available. Through bar code they enter the quantity of garments. After that, the material is packed in the Polly bags and then the garments are placed in the cartons. There is also the customer auditor in the packing section who checks the quality of materials by selecting random packing box. After approval, the garments are ready to be dispatched. Now the order is ready to be shipped. ORGANIZATIONAL STRUCTURE OF NISHAT APPAREL LIMITED Source: Nishat Apparel Limited: Human Resource Department FLOW CHART OF MATERIALS TO FINISHED GOODS LITERATURE REVIEW LITERATURE REVIEW Mariappan. V Chidambaram. K (2003) in their article have done a survey of the benefit exhibition of the National Textile Corporation in Tamil Nadu and Pondicherry showing an exasperating picture of downtrodden limit utilisation, old fashioned engineering and machinery, poor support and overabundance human power. It has been shown here that the textile division is an unpredictable industry and measuring the gainfulness of the textile industry is a perplexing task. There are different sorts of assets, which are not inter-convertible and are utilized in the processing of textile features. Therefore, productivity in textiles could be measured as far as any of the assets utilized. Study of capacity utilization of the corporation and the installed capacity of the spinning and weaving has been undertaken by the authors as a methodology to reach a conclusion. Productivity is getting drained mainly due to underutilization of machines, inefficient working, poor machinery maintenance, over spinning, lack of modernisation, power shortage and unhealthy labour and management relations. Ganesh. S (2002) in his article has identified that the Indian textile industry is in a state of rot, if viewed from the point of view of readiness for the opening of the globe textile business sector in 2005. The cotton ginning has a poor quality and wastage of spinning takes place due to which imports are descending. As a consequence, the costs increase. The Indian textile industry is excessively divided and outdated to profit from the business openings which will follow the end of portion controls. At the same time trading units are helpless in the event that they are denied of right to gain entrance to the residential business. Patibandla. M Chandra. P (1998) in their journal have explained the inter-firm variations in the adoption of different organizational practices and labour productivity on the basis of various factors such as screening, benefit-imparting, flexibility in working hours, productivity by a team, just in time and the size of the firm based on the primary survey taken from the Canadian Textile Industry. The outcomes infer that screening and benefit-imparting are substitutes. Benefit-imparting rehearse has all the marks of being more successful in little firms than vast firms. Information from 62 firms was gathered by the authors throughout 1992-1993 by means of a post survey that was caught up by conversations with plant administrators for about 30% of the firms. Other than this, various different variables have been defined by the authors for this particular study and the production function framework has been used to find out the results. Harpaz. I Meshoulam. I (2010) in their paper have written about the implication of work, occupation relations, and strategic human assets administration. This paper demonstrates that Israeli specialists working in textile firms have ended up being more individualistic and materialistic, and less aggregately turned. The mentioned issues clearly impact job relations and organizational strategies. Subsequently, it focuses on strategic human assets administration centres on the move of Israels textile mills Human Resources calling, from the accepted HR part to the revamped Strategic Human Resource Management part. The three major influential changes and their impact on the Human Resources Profession being mentioned are the growth and development of the high technology industry, globalization, and the strategic movement. High technology industry brought with it an additional important change an emphasis on innovation. Creating an environment of innovation required a new managerial approach and new HRM emphasis. Empowerment, flexibility, collaboration, better use of employees collective wisdom and less formal structures is just a few of the basics in developing and encouraging innovation. The area of HR measurement is ignored, to a large extent, by Israeli managers. Tools are not developed, expertise is minimal and management does not demand it as an integral part of the business. Very few organizations have implemented holistic, systematic measurement methodologies, such as the HR Scorecard. Tanveer.Y, et al. (2011) in their journal The Way Human Resource Man